Allied Vision AVT Pike Selebaran Instruksi
Jelajahi secara online atau unduh pdf Selebaran Instruksi untuk Kamera Keamanan Allied Vision AVT Pike. Allied Vision AVT Pike 2 halaman.
Halaman Cetak
Instruction Leaflet
Allied Vision Technologies GmbH
Taschenweg 2a
D-07646 Stadtroda / Germany
Scope of delivery
Each camera package consists of the following system components:
AVT Pike camera
4.5 m 1394b cable with
screw locking
CD with driver
and documentation
Optional:
Optional:
tripod adapter
GOF cable
Figure 1: System components
www
For more accessories visit the AVT website at:
http://www.alliedvisiontec.com/avt-products/accessories.html
AVT Pike
V2.0.0
13 August 2008
Color version:
Jenofilt 217 IR cut filter
(built-in)
B/w version:
only protection glass
(no filter)
Optional: HIROSE connector
for cable mount
HR10A-10P-12S
PIKE Instruction Leaflet V2.0.0
3
CE conformity
Info
•
AVT PIKE cameras are in conformity with the CE standard and its
underlying directions.
Technical and ordering info
Info
•
Technical information:
phone (for Germany): +49 (0)36428 677-270
phone (for USA): +1 978-225-2030
outside Germany/USA: Please check the link for your local
dealer.
http://www.alliedvisiontec.com/partner.html
•
Ordering and commercial information:
phone (for Germany): +49 (0)36428 677-230
phone (for USA): +1 978-225-2030
outside Germany/USA: Please check the link for your local
dealer.
http://www.alliedvisiontec.com/partner.html
Please note order number/text given in the following tables.
Camera I/O connector
2
3
11
4
Figure 2: Camera I/O connector pin assignment
Pin Signal
Direction Level
1
External GND
GND for RS232 and ext.
power
2
External Power
+8...+36 V DC
3
Camera Out 4
Out
Open emitter
4
Camera In 1
In
U
(high) = 2 V...U
in
U
(low) = 0 V...0.8 V
in
5
Camera Out 3
Out
Open emitter
6
Camera Out 1
Out
Open emitter
7
Camera In GND
In
Common GND for inputs Camera Common Input Ground
8
RxD RS232
In
RS232
9
TxD RS232
Out
RS232
10
CameraOutPower In
Common VCC for outputs
max. 36 V DC
11
Camera In 2
In
U
(high) = 2 V...U
in
U
(low) = 0 V...0.8 V
in
12
Camera Out 2
Out
Open emitter
Table 1: Camera I/O connector pinning
For maximum voltage levels see Hardware Installation Guide, Chapter PIKE
input descriptions.
PIKE Instruction Leaflet V2.0.0
1
9
10
8
12
7
6
5
Description
External Ground for RS232
and external power
Power supply
Camera Output 4
(GPOut4)
default: -
Camera Input 1
inVCC
(GPIn1)
default: Trigger
Camera Output 3
(GPOut3)
default: Busy
Camera Output 1
(GPOut1)
default: IntEna
(In GND)
Terminal Receive Data
Terminal Transmit Data
Camera Output Power
for digital outputs (OutVCC)
Camera Input 2
inVCC
(GPIn2)
default: -
Camera Output 2
(GPOut2)
default: -
PIKE Instruction Leaflet V2.0.0
2
4