EarthQuake DJ-ARRAY GEN2 Panduan Pemilik - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pembicara EarthQuake DJ-ARRAY GEN2. EarthQuake DJ-ARRAY GEN2 12 halaman. Line array speaker system
Halaman Cetak
ASSEMBLING DJ-ARRAY GEN2 SPEAKERS CONT.
2.
With the mounting brackets assembled, begin
mounting the array speakers with the remaining
mounting hardware. Each of the four array speak-
ers will require two bolts to securely fasten them
to the mounting bracket. Align the speaker con-
tacts with the mounting bracket contacts and gen-
tly push the speaker into place. Secure the array
speaker with the two bolts and be careful not to
over tighten them. Doing so could strip the
threads inside the speaker. Repeat this step for
the remaining pieces until all for speakers are se-
curely fastened to the mounting bracket.
Specifications are subject to change without notice.
3.
The DJ-Array GEN2 line array speaker system is
now ready to mount onto a stand. Earthquake
Sound supplies speaker stands (sold separately)
that can match with the DJ-Array GEN2. The 2B-
ST35M steel speaker stand is recommended for
this array speaker.
DJ-Array GEN2 Manual
7