Award A9062C Buku Petunjuk - Halaman 15

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Oven Award A9062C. Award A9062C 16 halaman.

Halaman Cetak

TECHNICAL INFORMATION

TYPE
Dimensions
900/897/600
(height/width/depth) mm
Cooktop
180mm Hilight heater(kW)
145mm Hilight heater(kW)*2
220mm Hilight heater(kW)
250mm/145mm
Hilight heater(kW)
Oven
Guide levels
Top heater(kW)
Bottom heater(kW)
Grill heater(kW)
Oven illumination(W)
Function modes
Top+bottom heater(kW)
Top+bottom heater+fan(kW)
Fan+Rear heater(kW)
Bottom heater(kW)
Fan+Bottom heater(kW)
Fan(W)
Half grill(kW)
Top/grill(kW)
Fan+Half grill(kW)
Temperature
Frequency(Hz)
Electrical Input(V)
380-415V ~
Oven power(kW)
Hotplate power(kW)
Total main power(kW)
28
A9062C
1.8
1.2
2.3
2.0/1.1
6
0.85
1.15
1.1
25
3.0
3.0
3.0
1.8
1.8
60
1.8
3.0
1.8
50-250℃
50
220-240V/
3.0
8.5
11.5
ELECTRICAL CONNECTION
Caution !
All electrical work should be carried out by a suitably qualified and authorized electrician.
No alterations or willful changes in the electricity supply should be carried out.
The fixing line connected must be equipped with the all-pole disconnection device
provided by breakaway the contact under overvoltage category III according to
the wiring rules.
Fitting guidelines
The cooker is manufactured to work with three phase alternating current (380-415V~50
Hz). The voltage rating of the cooker heating elements is 220-240V. Adapting the cooker
to operate with one phase current is possible by appropriate bridging in the connection
box according to the connection diagram below. The connection diagram is also found on
the cover of the connection box. Remember that the connection wire should match the
connection type and the power rating of the cooker.
CONNECTION DIAGRAM
Caution! Voltage of heating elements 220-240V
Caution! In the event of any connection the safety
Wire must be connected to the
E terminal.
For 220-240V earthed one-phase connecti-
1
on,
bridges connect 1-2-3
terminals and
4-5 terminals, safety wire to
For 380-415/220-240V earthed three-phase
-
2
connection, bridges connect 4-5 terminals,
phases in succession 1,2 and 3, earth to
4-5, the safety wire to
.
L1=R, L2=s, L3=T, N= Null Terminal, E=safety wire terminal
The connection cable must be secured in a strain-relief clamp.For the connection leads,
the grounding wire must be longer than the other wires.
Caution !
Remember to connect the safety circuit to the connection box terminal marked with
Before connecting the cooker to the power supply it is important read the informatIion on
the data plate and the connection diagram.
2
3
1
Recommended
type of
connection
4
L1
H05VV-F3G 6
.
E
N
L1
L1
L2
L3
H05VV-F5G1.5
E
N N
lead
.
29