Award H103 Petunjuk Penggunaan - Halaman 10

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan untuk Kompor Award H103. Award H103 20 halaman.

Halaman Cetak

Booster function

The booster function [
If this function is activated the heating zones runs for 5 minutes on ultra high power.
The booster is used to heat up rapidly large quantities of water, noodles etc.
•
Start up / Stop the booster function:
Action
Zone selection
Start the Booster
Stop the Booster
•
Power management:
The hob is equipped with two booster functions. When the booster function is activated, if it
exceeds maximum power, the electronic system automatically reduces the power level on other
heating zone. The display blinks on [ 9 ] for a few seconds and then shows the maximum of
power allowed :
Heating zone selected
[ P ] is displayed

Timer

The timer is able to be used simultaneous with all heating zones with different time settings (from
0 to 99 minutes) for each heating zone.
•
Setting and modification of the cooking time:
Example for 16 minutes at power 7:
Action
Zone selection
Select the power level
Select « Timer »
Set the units
Validate the units
Set the tens
Validate the tens
The time is confirmed, and cooking starts.
•
To stop the cooking time:
Example for 13 minutes at power 7:
Action
Zone selection
Select « Timer »
Deactivate the units
Validate the units
Deactivate the tens
Validate the tens
] gives a boost of power to the selected heating zone.
Control panel
Press display [ 0 ] for zone
Press key [
Slide the "SLIDER"
Or press [
The other heating zone:
[ 9 ] goes to [ 7 ] depending the type of zone
Control panel
Press display [ 0 ] selected
Slide the "SLIDER" to [ 7 ]
Press display [ CL ]
Slide the "SLIDER" to [ 6 ]
Press display [ 06 ]
Slide the "SLIDER" to [ 1 ]
Press display [ 16 ]
Control panel
Press display [ 0 ] selected
Press display [ 13 ]
Slide the "SLIDER" to [ 0 ]
Press display [ 10 ]
Slide the "SLIDER" to [ 0 ]
Press display [ 00 ]
]
]
(example: power level 9)
10
Display
[ 0 ] and control light on
[ P ] during 5 min
[ P ] to [ 0 ]
[ 9 ]
Display
[ 0 ] and control light on
[ 7 ]
[ 00 ]
[ 0 fixed ] [ 6 blinking ]
[ 0 blinking ] [ 6 fixed ]
[ 1 blinking ] [ 6 fixed ]
[ 16 ]
Display
[ 0 ] and control light on
[ 13 ]
[ 1 fixed ] [ 0 blinking ]
[ 1 blinking ] [ 0 fixed ]
[ 0 blinking ] [ 0 fixed ]
[ 00 ]