ALLIGATOR sens.it RetroFIT-kit 2.0 Panduan Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Aksesori Mobil ALLIGATOR sens.it RetroFIT-kit 2.0. ALLIGATOR sens.it RetroFIT-kit 2.0 18 halaman. Pressure monitoring system

Halaman Cetak

1.11 Display menu guidance

The display is in monitoring mode after switching on, chapter 1.6

Step 1: Settings

Please press and hold button Bt1 to enter the settings.

The display switches back to monitoring mode after approx. 4 minutes without actuation of

a button.

Step 2: Pressure and temperature

a) Select pressure unit

For bar  briefly press Bt1 twice

For PSI  briefly press Bt2 then briefly press Bt1 twice

b) Select temperature unit

For °C  briefly press Bt1 twice

For °F  briefly press Bt2 then briefly press Bt2 twice

Confirm by

pressing Bt1

twice briefly

Confirm with Bt1

Change the pressure unit (bar/PSI)

by briefly pressing button Bt2

Confirm by pressing Bt1

twice briefly

Change the temperature unit (C°/F)

by briefly pressing button Bt2

Confirm with Bt1