Christie 140-133108 Series Lembar Instruksi - Halaman 2
Jelajahi secara online atau unduh pdf Lembar Instruksi untuk Aksesori Proyektor Christie 140-133108 Series. Christie 140-133108 Series 17 halaman. Ultra short throw lens installation
Halaman Cetak
Quantity
Description
3
Boresight extension rods
1
Boresight L-shaped socket key
12
M3x8 screws
6
M3x8 hex screws
4
M6x22 screws
4
M6x55 screws
4
M6x65 screws
6
M3 washers
10*
M6 washers
1
Product information card
* Six of the washers are provided as spare parts.
Required tools
The following tools are required.
•
Long neck #2 Phillips screwdriver
•
L-shaped socket key provided with the lens kit
•
2.5 mm allen key
•
5 mm hex nut driver
•
10 mm hex key wrench
Upgrading projectors to version 1.1.0 or newer
software
Christie is continuously improving the GS Series product line. To make sure you are getting the best
experience, version 1.1.0 or newer software is mandatory for the ultra short throw lens application.
For 1075-GS, 630-GS, and 635-GS, the current firmware version is compatible with the ultra short throw
lens application.
1. To download version 1.1.0 or newer of the new GS Series software, go to https://
www.christiedigital.com/en-us/business/products/projectors/1-chip-dlp/gs-series.
2. From the Overview tab, select the appropriate projector model.
3. Select Downloads > Software Downloads.
4. Under Christie GS Series Software (Version X.X.X), click Download.
Where X.X.X is version 1.1.0 or newer.
5. Install the software and reboot the projector.
Ultra Short Throw Lens Installation Instruction Sheet
020-102569-05 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Ultra short throw lens installation
2