Christie CineLife+ CP4415-RGB Panduan Instalasi dan Pengaturan - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Pengaturan untuk Rak dan Dudukan Christie CineLife+ CP4415-RGB. Christie CineLife+ CP4415-RGB 19 halaman. Christie rack mount pedestal
Halaman Cetak
7. Make sure enough space is provided between the projector and the foot brackets.
This space is required to install the projector foot bracket locks.
Installing the projector foot locks
The foot locks secure the projector feet into position.
1. Slide the projector foot lock over the projector foot bracket.
2. Install one screw in each of the four projector foot locks to secure them in position.
Configuring the rack for side-mounting
By default, the Christie Rack Mount Pedestal is configured for back-mounting of components. Complete
this procedure if side-mounting of components is required.
1. Remove the side panel from each side of the rack.
a) Unlock the side panel.
b) Press down on the two panel latches and tip the panel away from the rack.
c) Lift the panel up and out from the rack and set aside.
d) For the second panel, repeat steps a to c.
Christie Rack Mount Pedestal Installation and Setup Guide
020-100632-04 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installation and setup
13