Miele PW 6055 AV Rencana Instalasi - Halaman 15

Jelajahi secara online atau unduh pdf Rencana Instalasi untuk Mesin cuci Miele PW 6055 AV. Miele PW 6055 AV 15 halaman. Washing machine
Juga untuk Miele PW 6055 AV: Rencana Instalasi (11 halaman)

Halaman Cetak

PW 6055/6065

3. Drain into a floor drain (gully).

Permanent connection of the drain hose to a sink syphon

You may permanently connect the drain hose to a special sink

syphon.

If necessary, the hose may be extended to a maximum length of 5 m.

Accessories are available from an authorized Miele dealer or Miele

Technical Service.

For delivery heads over 3' 3 3/8" (1 m) (up to a max. of 5' 10 7/8" /

1.8 m), contact your Miele dealer or Miele Customer Service for a

drain pump.

Equipotential bonding

Depending on the local and national installation regulations, you may

have to create equipotential bonding with proper contact connection.

The connection material for a necessary equipotential bonding can be

ordered as an assembly kit from Miele Service or supplied by the user.

Peak load/energy management

Using an optional kit, you may connect the appliance to a peak load or

energy management system.

The appliance provides 3 signal contacts with mains potential and a

neutral conductor on terminal strip, which is identified with a, b, c, and

a - Output signal: machine operation starts

b - Output signal: machine requests heating

c - Input signal peak load: machine switches heater

d – Neutral conductor

When the peak load function is activated, the heating is switched off

and the program is stopped. The display returns a corresponding

message.

Upon the end of the peak load function, the program automatically

resumes.

Liquid dosing connection

You can use external liquid dosing pumps with low-level sensor for the

dosing of liquid detergents.

You can only use dosing pumps with internal controller and/or

programming option for liquid dosing.

Always note the manufacturers' instructions when using and

combining detergents and special products.

Payment device

The washing machine can be fitted with a single payment device as

an optional accessory. Only an authorized Miele dealer or the Miele

Service may program the appliance for this function.

10 145 220 / 01

Alternatively, you can use a wireless multi-station system for

maximum 8 terminals with a debit card payment device and additional

controllers for terminal monitoring.

Serial interface

The serial interface is provided with an additional integrated XKM

RS323 module.

The data interface leading from the XKM RS232 module is compliant

with SELV (safety extra-low voltage). Any connected external devices

must also comply with SELV.

The pluggable module is supplied with a connecting cable and a D-

sub plug for further connection.

Installation and fastening

The machine must be installed on a level, horizontal, and solid surface

which is capable of withstanding the specified stresses.

The floor load caused by the appliance affects the installation surface

as point load in the area of the device mounts.

Positional stability of the appliance is mandatory.

Use the adjustable mounts to horizontally align the appliance length-

and crosswise.

Use the supplied mounting bracket to attach the two front mounts of

the appliance to the floor. The fixing material is designed for a dowel

attachment to concrete flooring.

The user must provide fixing material for any different flooring design.

Platform installation

The washing machine may be installed on a base (open or closed

compartment) which may be optionally purchased from Miele. It may

also be installed on a user-supplied concrete platform.

The quality of the concrete and its strength must be assessed

according to the machine load. Ensure that the on-site concrete

platform has an adequate grip on the substrate.

If the washing machine is installed on a user-supplied platform

(concrete or masonry), you must secure the machine with the

mounting bracket to prevent the possibility of the washing machine

toppling off the platform during the spin cycles.

Washer/dryer stack

The Miele washing machine can be installed in combination with a

Miele dryer as part of a washer-dryer stack. For this purpose, you

require a connection kit

(WTV) which can be optionally purchased.

Only an authorized specialist or Miele Service representative may

install the connection kit.

en -