Miele PW 6080 EL AV Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Mesin cuci Miele PW 6080 EL AV. Miele PW 6080 EL AV 10 halaman.

Halaman Cetak
Waste water
Max. temperature
Model with dump
Machine waste water connection (external diameter)
valve
On-site drain (internal diameter)
Max. transient throughput
Vented drainage required. If ventilation is insufficient, fit Miele
kit, Mat. no. 05238090.
Drain manifolds serving several machines must be of
sufficient cross-section.
Drainage via
Max. temperature
drain pump
Drain hose (inner diameter)
On-site hose sleeve for drain hose
(inner diameter x length)
Max. transient throughput
Max. head height (measured from base of unit)
Vented drainage required. If ventilation is insufficient, fit Miele
kit, Mat. no. 05238090. .
Drain manifolds serving several machines must be of
sufficient cross-section.
Fittings
Miele plinth UG/UO 6008
(supplied)
4 × fasteners (to secure machine to plinth)
4 × screws DIN 571 (Ø × length)
4 × rawl plugs (Ø × length)
Machine must be bolted to the floor!
Fixing materials for floating screed floor to be provided on site
Miele plinth US 6008
4 × fasteners (to secure machine to plinth)
4 × screws DIN 571 (Ø × length)
4 × rawl plugs (Ø × length)
Machine must be bolted to the floor!
Fixing materials for floating screed floor to be provided on site
On concrete plinth
2 × metal brackets
2 × screws DIN 571 (Ø × length)
2 × rawl plugs (Ø × length)
Machine must be bolted to the floor!
Fixing materials for floating screed floor to be provided on site
Machine data
Machine width
Machine depth
Machine height
Casing width
Casing depth
Min. access width to installation site
Minimum rear wall gap (measured to front of machine)
Minimum wall gap (to front edge of machine)
With an installation with the minimum gap, additional work
may be required when service or repair work is necessary.
Net weight
Dynamic floor load, max.
Static floor load, max.
Dynamic load, max.
Drum frequency, max.
Average heat dissipation
(dependent on ambient room temperature and programme
selected)
Sound pressure level (re 20 mPa),
(measured at a distance of 1 m from the machine and at a
height of 1.6 m)
Installation should only be carried out by authorised fitters in accordance with valid regulations!
Observe installation instructions when installing machine! All rights reserved! Dimensions in mm
Technisches Datenblatt / Technical datasheet: PW 6080 EL AV/LP
Datum / Date: 28.10.2009
°C
70
mm
75 [DN 70]
mm
75 [sleeve DN 70]
l/min
62
°C
70
mm
22 [DN 22]
mm
22 × 30
l/min
26
mm
1000
mm
8 × 65
mm
12 × 60
mm
6 × 50
mm
8 × 40
mm
6 × 50
mm
8 × 40
mm
700
mm
727
mm
1020
mm
692
mm
690
mm
720
mm
1100
mm
900
kg
140
N
2600
N
1850
N
750
Hz
22
W
Not yet available
dB (A)
<70
Seite / Page: 10