Miele PW 6241 Panduan Petunjuk Pengoperasian - Halaman 33
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin cuci Miele PW 6241. Miele PW 6241 46 halaman.
Juga untuk Miele PW 6241: Petunjuk Pengoperasian dan Pemasangan (44 halaman), Petunjuk Pengoperasian dan Pemasangan (44 halaman), Manual Petunjuk Pemrograman (48 halaman)
Halaman Cetak
The machine should be cleaned and
checked over immediately after use where
possible.
,
Do not use a pressure washer or hose
to clean the machine.
The housing, control panel and any
plastic components should be cleaned
using a suitable mild cleaning agent,
applied with a soft damp cloth. Rub dry with
a soft cloth after cleaning.
Do not use abrasive cleaning agents as
they will damage the surface material.
Parts of the housing made from stainless
steel can be cleaned using a suitable
proprietary stainless steel cleaning agent.
Any deposits on the door seals should be
wiped off using a damp cloth.
Clean the detergent dispenser, dispenser
compartments and siphons
The detergent dispenser, dispenser
compartments and siphons must be cleaned
after each use with warm water to thoroughly
remove any residues of detergents or other
agents. If the machine is not going to be
used for a while the detergent dispenser
should be left open to air the compartment.
The siphon in the dispenser compartment
for fabric conditioner should also be
cleaned.
Remove the siphon and clean with hot water.
Then put it back in place.
M.-Nr. 06 572 495
Cleaning and care
The grille over the cooling fan at the back of
the machine should be checked for soiling
from time to time and cleaned if necessary.
Rust
The drum and suds container are
manufactured from rust free stainless steel.
Water with a very high iron content, or
foreign objects such as paper clips, metal
buttons etc. which get into the drum with the
laundry can cause superficial rusting in the
drum and suds container.
To prevent this happening the drum and
suds container should be checked and
cleaned regularly and if rusting does occur it
should be removed using a proprietary
cleaning agent for stainless steel.
The door seals should be checked for
foreign objects regularly and cleaned as
described above.
Leave the door ajar after cleaning to allow
the machine to dry.
33