Miele PW 6323 Panduan Petunjuk Pengoperasian - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin cuci Miele PW 6323. Miele PW 6323 46 halaman.
Halaman CetakDescription of the machine
Function buttons
Pressing the button activates the function
and pressing the button again deactivates it.
f Stop/End
The function button on the right-hand side is
used as the End button after the start of a
programme.
Once it has been pressed the selected
programme is stopped or a programme
which has been stopped is finished.
+i Block plus
The relevant programme block (e.g.
Pre-wash) is added to the programme.
m
Starch stop
Press this button if you wish to laundry to be
starched.
k Without spin
Press this button if you do not want the
laundry to be spun after being rinsed.
FC Settings
Press this button to switch to another
language temporarily.
m Start time
Pressing this button before the start of a
programme displays the message that a
start time can be selected.
K Information
Press this button to call up programme
information in the display.
q Water drainage
i Manual control
See the programming instruction booklet.
ü Change order
The order of the programme in progress can
be changed or programme blocks can be
repeated.
A Back
Takes you back to the previous display.
e/- Indicates that there is more
information on next or previous line
S Save
See the programming instruction booklet.
12
$ Programme locked
Once a locked programme has been
started, the End button can only be used to
stop and cancel it during the first 1 minute.
The programme finishes on the "clean side".
) Programme unlocked
This unlocks a locked programme.
ß
Dispensing
ä
Dispensing switched off
\
Operating data
If when the drum is empty the load display is
not showing "00,0", you will need to press
the -> I <- button to reset it to 0.
D Data transfer
Supervisor Chip card
The chip card is supplied without any
programmes.
See the Programming Manual for information
on transferring data from the control unit to
the chip card and vice versa.
The chip card can store a maximum of 30
programmes, each with 6 blocks.
The back of the chip card can be labelled.