Miele G 1 Series Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Mesin pencuci piring Miele G 1 Series. Miele G 1 Series 46 halaman.
Juga untuk Miele G 1 Series: Manual (14 halaman)

Halaman Cetak

G 1xxx/G 2xxx

Options:

Function

Reset

Water hardness setting

Dispensed rinse aid

quantity setting

Buzzer on/off

Resetting standard

settings

Programming

Press the Program button

1x. To reset all parameters

to standard settings, press

and hold the Program

button until the

"Intake/Drain" LED lights

up. Then briefly press the

Program button.

Briefly press Program 2x.

To set the desired water

hardness, press and hold

the Program button until

the "Intake/Drain" LED

lights up. Then select the

desired value by briefly

pressing the Program

button as appropriate.

Briefly press Program 3x.

To set the desired

quantity, press and hold

the Program button until

the "Intake/Drain" LED

lights up. Then select the

desired value by briefly

pressing the Program

button as appropriate.

Briefly press the Program

button 4x. To make the

desired setting, press and

hold the Program button

until the "Intake/Drain"

LED lights up. Then select

the desired setting by

briefly pressing the

Program button as

appropriate.

Briefly press Program

12x. To reset all

parameters to standard

settings, press and hold

the Program button until

the "Intake/Drain" LED

lights up. Then briefly

press the Program button.

Technical Information

Display

The "Intake/Drain" LED flashes 1x

rapidly. "SaniWash" LED is off:

values do not correspond to

standard settings; "SaniWash" LED

flashes: values correspond to

standard settings.

The "Intake/Drain" LED flashes 2x

rapidly at intervals. The set value is

indicated by the "SaniWash" LED

flash pattern. If the "SaniWash" LED

flashes 4x rapidly at intervals, this

corresponds to the standard setting

of 12 - 15°d (12.8 - 16.1 gpg); see

Table 3.

The "Intake/Drain" LED flashes 3x

rapidly at intervals. The set value is

indicated by the "SaniWash" LED

flash pattern. If this LED flashes 3x

rapidly at intervals, this corresponds

to the standard setting of 0.1 fl.oz.

(3mL). Range: 0 - 0.2 fl.oz. (0 - 6

mL); see Table 4.

The "Intake/Drain" LED flashes 4x

rapidly at intervals. "SaniWash"

LED is off: Buzzer on (standard

setting). "SaniWash" LED flashes:

Buzzer off.

The "Intake/Drain" LED flashes 1x

slowly and 2x rapidly at intervals.

This programmable function can be

used to reset all parameters that can

be modified by the customer to

standard settings. If the "SaniWash"

LED is off, the values do not

correspond to standard settings. If

the "SaniWash" LED flashes, the

values correspond to standard

settings.