Miele G 1472 Manual - Halaman 43

Jelajahi secara online atau unduh pdf Manual untuk Mesin pencuci piring Miele G 1472. Miele G 1472 46 halaman.
Juga untuk Miele G 1472: Manual (14 halaman)

Halaman Cetak

G 1xxx/G 2xxx

Options:

Note:

Some of the following parameters can also be programmed via the Settings menu.

Function

Reset

Setting the language

Setting the time of day

Format

Set manually

Setting the detergent type

Dispensed rinse aid

quantity setting

Activating/deactivating

Drying Plus

Setting the intervals for

the filter checks

Adjust Sensor wash

program

Programming

Select Reset. To restore

the standard settings,

select OK. To return to the

main menu, press Back.

Select Language.

Select a language and

confirm with OK.

Select Time of day.

Select a submenu and

confirm with OK.

Choose 24- or 12-hour

setup and confirm with

OK. Press C (clear) to go

back one level.

Set the time (seconds,

then minutes) using the +,

- buttons and confirm with

OK. Press C (clear) to go

back one level.

Select Detergent type.

Select a detergent type

and confirm with OK.

Select Rinse aid. Select a

rinse aid quantity with the

+, - buttons and confirm

with OK.

Select Drying Plus.

Select a setting and

confirm with OK.

Select Check filters.

Select a wash interval and

confirm with OK.

Select Adjust sensor

wash. Select a setting and

confirm with OK.

Technical Information

Display

The display reads Reset standard

settings?

The display lists the languages that

can be selected. A language must

be selected in order to return to the

main menu.

The submenus Format and Set

manually can be selected.

Display of both clock formats.

Entry request is indicated.

The display shows the selection of

available detergent types: Powder,

GEL, 2 in 1 and 3 in 1 for G 2830;

Powder, GEL and Tab for G 2832

and G 2872.

The display shows the current rinse

aid dispensing quantities: The

dispensed quantity can be set from

0 to 0.2 fl.oz. (0 - 6 mL). Standard

setting: 0.1 fl.oz. (3mL).

If the function is activated, the door

automatically moves to the drying

position at the end of the program;

see the service manual.

The display shows the intervals

available for selection. Range: 30 -

60 wash cycles.

Setting options On, Off (standard

setting). (Yes and No for G 2872).

With this parameter, Sensor wash

can be adjusted for use against

stubborn stains (if overall soiling is

moderate). If this option is selected,

the main wash temperature is

raised to 131°F, resulting in an

extended running time.