Miele G 1472 Manual - Halaman 9

Jelajahi secara online atau unduh pdf Manual untuk Mesin pencuci piring Miele G 1472. Miele G 1472 46 halaman.
Juga untuk Miele G 1472: Manual (14 halaman)

Halaman Cetak

G 1xxx/G 2xxx

Function

Water hardness setting

Dispensed rinse aid

quantity setting

Adjust Sensor Wash

program

Resetting standard

settings

Adjusting the main wash

temperature

Programming

Press the Delay Start

button 2x. The "Delay

Start" LED flashes 2x

rapidly intermittently.

Press the Start/Stop

button as appropriate to

set the desired water

hardness.

Press the Delay Start

button 3x. The "Delay

Start" LED flashes 3x

rapidly intermittently.

Press the Start/Stop

button as appropriate to

make the desired setting.

Press Delay Start 5x. The

"Delay Start" LED flashes

5x rapidly intermittently.

Press the Start/Stop

button to change the

setting.

Press Delay Start 12x.

The "Delay Start" LED

flashes 1x slowly and 2x

rapidly intermittently.

Press the Start/Stop

button to reset all settings

back to their factory

values.

Press the Delay Start

button 20x. The "Delay

Start" LED flashes 2x

slowly. Press the

Start/Stop button as

appropriate to make the

desired setting.

Technical Information

Display

The "Rinse" LED is out or flashes.

The display shows p and the digit/s

of the set value alternately.

Setting range: p1 to p70; see Table

The "Rinse" LED is out or flashes.

The display shows P and a digit

alternately: e.g., P3 (standard

setting) indicates a dispensed

quantity of 0.1 fl.oz. (3mL). Setting

range: 0 - 0.2 fl.oz. (0 - 6 mL). See

Table 7.

The "Rinse" LED is out or flashes.

The display shows P and a digit

alternately. Setting options: P0 =

Standard program cycle (factory

setting); P1 = Adjusted program

cycle. The Sensor Wash program

can be adjusted in this parameter to

deal with stubborn soiling (or

otherwise low overall soiling). If this

option is selected, the main wash

temperature is increased to 131°F

and, as a result, the program

duration is extended.

The "Rinse" LED is out or flashes.

This programmable function can be

used to reset all customer-modified

parameters back to their standard

settings. The display shows P and a

digit alternately. P0 = Settings have

been modified; P1 = All settings reset

to standard settings or no

modifications have been made.

The "Rinse" LED is out or flashes.

The display shows p and a digit

alternately. Setting options: p0 =

Standard setting; p1 = Wash

temperature increased. If this option

is selected, the main wash

temperature is increased and, as a

result, the program duration is

extended.