Miele G 2142 Manual - Halaman 29

Jelajahi secara online atau unduh pdf Manual untuk Mesin pencuci piring Miele G 2142. Miele G 2142 46 halaman.

Halaman Cetak

G 1xxx/G 2xxx

Rinse Aid Volume [mL]

Table 20: Rinse Aid Quantities, G 2120/G 2140/G 2150

One milliliter equals 0.3 fluid ounces.

Standard setting.

2.8

Inspira and Diamante - G 2142/G 2143

Initial requirements:

1. Close the door.

2. Switch off the appliance.

Accessing:

1. Press and hold the Start/Stop button.

2. Switch on the appliance.

3. Release the Start/Stop button.

4. Immediately press the Start/Stop button 5 times; on the 5th time, hold

until the "Start/Stop" LED flashes.

5. Release the Start/Stop button.

6. If the "Start/Stop" LED does not light up, repeat the procedure.

Acknowledgement indicator:

The "Start/Stop" LED flashes rapidly (5 flashes per second).

Options:

Function

Reset

Water hardness setting

Flash Pattern of "Rinse" LED

Programming

Press the Program (or

Delay Start for G 2143)

button 1x. Press the

Start/Stop button to reset

all standard settings.

Press the Program (or

Delay Start for G 2143)

button 2x. Press the

Start/Stop button as

appropriate to set the

desired water hardness.

Technical Information

—

1x rapidly

2x rapidly

3x rapidly

4x rapidly

5x rapidly

6x rapidly

Display

The "Rinse & Hold" LED flashes 1x

rapidly. "Rinse" LED is off: values

do not correspond to standard

settings; "Rinse" LED flashes:

values correspond to standard

settings.

The "Rinse & Hold" LED flashes 2x

rapidly. If the "Rinse" LED flashes

4x rapidly at intervals, this corres-

ponds to standard settings. Range:

1 - 70°d. See Table 22.