Miele CS 1028 Petunjuk Pengoperasian dan Pemasangan - Halaman 37

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Oven Miele CS 1028. Miele CS 1028 44 halaman. Combiset
Juga untuk Miele CS 1028: Petunjuk Pengoperasian dan Pemasangan (44 halaman), Petunjuk Pengoperasian dan Pemasangan (44 halaman), Petunjuk Konversi (40 halaman), Petunjuk Pengoperasian dan Pemasangan (44 halaman)

Installation and service must be

performed by a qualified installer,

service agency or the gas supplier.

In Massachusetts a licensed

plumber/gas fitter is required.

This appliance must be installed

with its own shut off valve and the

included gas pressure regulator.

Both the valve and the regulator

must be easily accessible to the

consumer to turn on or shut off the

gas supply after the appliance is

installed.

This appliance and its individual

shut off valve must be disconnected

from the gas supply during any

pressure testing performed in

excess of ½ psi (3.5 kPa), or

isolated from the gas line by closing

its individual manual shut off valve at

test pressures equal to or less than

½ psi (3.5 kPa).

Any pipe connections must be made

using a thread sealant approved for

gas connections. Failure to correctly

install these items could lead to a

gas leak and subsequent explosion.

Gas connection

The gas connection must be made

in accordance with local codes or, in

the absence of local codes, with

the National Fuel Gas Code,

ANSI Z 223.1/NFPA 54

for the USA

the current Can/CGA B 149.1

and .2 Installation Codes for gas

burning appliances for Canada.

Make sure that the maximum gas

supply pressure before the gas

pressure regulator is never more than

½ psi for both natural gas or LP gas.

The minimum supply pressure to get

the required gas input is

4" w.c. for natural gas:

10" w.c. for LP gas.