Miele DGC 5080 XL Panduan Petunjuk Instalasi - Halaman 32

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Oven Miele DGC 5080 XL. Miele DGC 5080 XL 36 halaman. Steam combi oven

DGC 5085 XL

Connection to the water inlet

Before plumbing the appliance in, ensure that it is

disconnected from the mains electricity supply.

^ Switch off at the mains.

^ Connect the stainless steel hose to the stopcock.

Ensure that it is screwed into position correctly.

The connection points are subject to mains water

pressure. Turn on the stopcock slowly and check for

leaks. Correct the position of the seal and union if

appropriate.

The drain hose can be connected to:

- An on-wall or in-wall odour trap with a fixed hose connection

- The appliance connection for the odour trap.

To ensure that the waste water is pumped away completely,

the mains drainage outlet point should not be positioned

higher than the drain hose outlet position on the appliance.

The temperature of the water being drained is approx. 70 °C.

Important:

The top end of the drain hose must not be higher than

500 mm where it connects to the odour trap.

The drain hose supplied must not be shortened.

If necessary, a 7.5 m long hose is available as an optional

accessory from the Miele Spare Parts Department.

We recommend using only original hoses from the

manufacturer.

The total hose length must not exceed 7.5 m.

^ Connect the drain hose to the odour trap using the hose

connector (C 21 mm).

^ Secure the hose using a hose clip.