Miele AWG 102 Panduan Petunjuk Instalasi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kap Ventilasi Miele AWG 102. Miele AWG 102 28 halaman. External motor roof installation
Juga untuk Miele AWG 102: Panduan Pengoperasian dan Instalasi (24 halaman), Petunjuk Pengoperasian dan Pemasangan (28 halaman), Panduan Petunjuk Instalasi (28 halaman)

Installation

DDG 102

The DDG 102 is designed for

installation on angled tiled, pantiled,

slate or shingle roofs. The slope of the

roof must be at least 22° to prevent the

ingress of the elements, such as rain or

snow.

Consult a roofing expert for advice

regarding other types of roofing.

This motor unit is not suitable for

installation on a flat roof.

Installation must only be carried out

by a qualified and competent person.

The external motor is connected to the

cooker hood by means of a control

cable and is operated by the controls

on the cooker hood.

Please refer to the operating and

installation instructions for the

cooker hood before installing the

external motor and ducting.

The ducting collar on the motor unit has

a diameter of 125 mm when the

appliance is supplied.

 If a diameter of 150 mm is required,

the front ring of the collar must be cut

at the join with a sharp knife.