Miele DA 1050-55 Petunjuk Pengoperasian dan Pemasangan - Halaman 27

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Miele DA 1050-55. Miele DA 1050-55 40 halaman.

Installation recommendations

– To achieve optimum vapour

extraction, the rangehood must cover

the cooktop. It should be positioned

centrally over the cooktop, not to the

side.

– The cooktop should be no wider than

the rangehood and, if possible, it

should be narrower, especially for

safety distances greater than 750

mm.

– The installation area must be easily

accessible. The rangehood should be

easily accessible and easy to

dismantle in the event that service is

required. This should be taken into

consideration when planning the

position of cupboards, shelves,

ceilings or features in the vicinity of

the rangehood.

The housing components of stainless

steel models have protective foil around

them to protect them from transport

damage.

 Please remove the grease filters from

the appliance and remove this foil

from the housing components and

the frames of the grease filters before

installing the rangehood. The foil can

be peeled off easily.

A deflector is installed in the rear of the

rangehood. Its position depends on the

operating mode. With extraction the air

is directed upwards and out of the

housing at the back. With recirculation

the opening is closed and the air is

directed forwards through the

recirculation grille.

Installation