Miele DA 1260 Petunjuk Pengoperasian dan Pemasangan - Halaman 30

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Miele DA 1260. Miele DA 1260 48 halaman.
Juga untuk Miele DA 1260: Petunjuk Pengoperasian dan Pemasangan (44 halaman), Petunjuk Pengoperasian dan Pemasangan (44 halaman), Petunjuk Pengoperasian dan Pemasangan (44 halaman)

Installation

Installation recommendations

– To achieve optimum vapour

extraction, the cooker hood must be

positioned centrally over the hob, not

to the side.

– The hob should be no wider than the

cooker hood, and if possible, it

should be narrower.

– The installation area must be easily

accessible. The cooker hood should

be easily accessible and easy to

dismantle in the event that service is

required. This should be taken into

consideration when planning the

position of cupboards, shelves,

ceilings or features in the vicinity of

the cooker hood.

The housing components of stainless

steel models have protective foil around

them to protect them from transport

damage.

 Please remove the grease filters from

the appliance and remove this foil

from the housing components and

the frames of the grease filters before

installing the cooker hood. The foil

can be peeled off easily.

A deflector is installed in the rear of the

cooker hood. Its position depends on

operating mode. With extraction the air

is directed upwards and out of the

housing at the back. With recirculation

the opening is closed and the air is

directed forwards through the

recirculation grille.