Miele DA 2450 Petunjuk Pengoperasian dan Pemasangan - Halaman 28

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Miele DA 2450. Miele DA 2450 32 halaman.
Juga untuk Miele DA 2450: Petunjuk Pengoperasian dan Pemasangan (36 halaman), Petunjuk Pengoperasian dan Pemasangan (32 halaman)

Installation

Recirculation mode

The silencer needs to be positioned

between the exhaust connection and

the exhaust grille . Ensure there is

adequate space for fitting it.

Electrical connection

The rangehood must only be connected

to a properly installed AC 230 V ~ 50 Hz

earthed socket.

The electrical installation must be in

compliance with current local and

national safety regulations.

For extra safety, it is advisable to

protect the appliance with a suitable

residual current device (RCD) with a trip

current of 30 mA.

Connection via a socket is

recommended as it facilitates customer

service (according to VDE 0701). The

socket should be easily accessible after

the appliance has been installed.

If the socket is no longer accessible

after installation, an additional means of

disconnection must be provided for all

poles. Suitable means of disconnection

include switches with an all-pole

contact gap of at least 3 mm.

These include isolator switches, fuses

and relays (EN 60335).

The relevant connection data can be

found on the data plate (see "Service").

Ensure that this data matches the

voltage and frequency of your

household mains supply.