Miele DA 2510 Petunjuk Pengoperasian dan Pemasangan - Halaman 43

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Miele DA 2510. Miele DA 2510 48 halaman.

Activating the cooktop

 While the rangehood is searching for

the radio connection, start activating

the cooktop.

More information about this can be

found in the Operating instructions

for the cooktop.

 When the cooktop registers that

connection has been established,

confirm activation on the rangehood

with the run-on option control 515.

All indicators will go out.

 Confirm the activation on the

cooktop.

The Con@ctivity 2.0 function can now

be used.

If you do not confirm your selection

within 4 minutes, activation will not take

place.

You only need to carry out the

activation procedure once. If the

appliances are disconnected from the

electricity supply, during a power cut

for example, they will still remain

activated.

Activating Con@ctivity 2.0

If connection cannot be established

despite activating the rangehood and

cooktop, the function must be

deactivated on both appliances and

then the procedure repeated.

 Deactivation on the rangehood is

carried out in the same way as

activation, by selecting the ""

control instead of "".

 To deactivate the cooktop, please

refer to the Operating instructions

supplied with it.

Please bear in mind that disabling the

signal will also disable any remote

control function and this will have to

be activated again.