Miele DA 3480 Panduan Petunjuk Instalasi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kap Ventilasi Miele DA 3480. Miele DA 3480 24 halaman. Ventilation system
Juga untuk Miele DA 3480: Panduan Pengoperasian dan Instalasi (40 halaman), Panduan Pengoperasian dan Instalasi (40 halaman)

The DA3460, DA3480 and DA3490

Built-In Ventilation Hoods all include

brackets to affix the hood body to

the rear wall of the enclosing

cabinet. (Fig. 1) These brackets are

necessary to ensure the long-term

rigidity and stability of the installed

appliance. In many cases, we have

found that the rear walls of some

cabinets are not structurally reliable.

This may be due to the materials

used, or the thickness of the rear

wall.

In this case, to guarantee a solid

connection, these brackets must be

attached to a structurally sound

surface (such as the wall behind the

cabinet) to maintain the hood's level

attitude (Fig 2). Depending on the

cabinet and wall construction,

alternative hardware may be

required. Please use hardware

which is designed to be used for

your specific installation application.

Failure to do so may cause the hood

to lean forward and cause

permanent damage to the sliding

shelf. This damage is not covered

by the warranty!

^ Connect the space bar from the rear

with 4 plastic rivets at the hood rear

side.

5. Install the front panel

if necessary

The installation kit DML 400 is

necessary. It can be obtained as an

optional accessory from Miele. The

installation kit has an installation manual

supplied.

Installation