Miele DA 422-6 EXT Petunjuk Pengoperasian dan Pemasangan - Halaman 39
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Miele DA 422-6 EXT. Miele DA 422-6 EXT 44 halaman. Cooker hood
Halaman Cetak
Installing the Con@ctivity 2.0
Stick
In order to use the Con@ctivity 2.0
function, the hob must first be fitted
with the Con@ctivity 2.0 Stick.
Please read the separate installation
instructions supplied with the
Con@ctivity 2.0 Stick.
Activating Con@ctivity 2.0
Wireless connection must be activated
between the cooker hood and the hob
before Con@ctivity 2.0 can be used.
Both appliances must be installed and
operational.
You only need to carry out the
activation procedure once. If the
appliances are disconnected from the
electricity supply, during a power cut
for example, they will still remain
activated.
To establish the wireless connection,
the cooker hood and hob must be
activated at the same time.
First activate the cooker hood, then the
hob.
Activating the cooker hood
Switch off the fan, hob lighting and
hob.
Press the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
Then press in turn,
– the "" control,
– then the "" control,
Activating Con@ctivity 2.0
– then the lighting control .
If Con@ctivity 2.0 is not activated, 2
and 3 will flash at the same time.
Press "" to activate Con@ctivity
2.0.
2 will light up constantly and 3 will
flash. The search for a wireless
connection is started.
Meanwhile, start activating the hob.
Activating the hob
While the cooker hood is searching
for wireless connection, start
activating the hob.
More information about this can be
found in the operating instructions for
the hob.
When connection has been established,
2 and 3 will light up constantly on the
cooker hood.
Confirm activation of the cooker
hood with the run-on option control
515. All indicators will go out.
Confirm activation of the hob.
Con@ctivity 2.0 is now ready to use.
If you do not confirm your selection
within 4 minutes, activation will not take
place.
Activation check
To check whether Con@ctivity 2.0 is
activated on the cooker hood:
Switch off the fan and hob lighting.
Press the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
39