Miele DA2280 Petunjuk Pengoperasian dan Pemasangan - Halaman 13

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Miele DA2280. Miele DA2280 36 halaman. Ventilation system
Juga untuk Miele DA2280: Dimensi (1 halaman), Panduan Pengoperasian dan Instalasi (40 halaman), Petunjuk Pengoperasian dan Pemasangan (40 halaman), Panduan Petunjuk Instalasi (19 halaman), Petunjuk Pengoperasian dan Pemasangan (44 halaman)

Filter timers

Grease filter timer

A timer monitors the hours of operation.

The indicator for the grease filter will

light after 30 hours of fan operation. The

grease filters must then be cleaned.

After the grease filters have been

cleaned and put back in place, the

grease filter timer must be reset.

^ To do this press the grease filter

button for about 3 seconds.

The indicator will go out.

To change the hours of operation, see

"Reprogramming the timers".

Charcoal filters

The timer for the charcoal filter is not

preset. To program this timer, see

"Operation / Reprogramming the

charcoal filter timer". The charcoal filter

indicator will light, once the selected

time has elapsed. The charcoal filters

must then be replaced and the

charcoal filter timer must be reset.

^ To do this, press the charcoal filter

button for about 3 seconds.

The indicator will go out.

To check the percentage of time set

already used:

^ Press the joystick to the left to turn

the fan on.

^ Press the grease filter or charcoal

filter button.

The number of flashing indicators show

the percentage of programmed hours

that have been used.

1 indicator = 25 %

2 indicators = 50 %

3 indicators = 75 %

4 indicators = 100 %

This information will remain stored in

memory in the event of a power failure.

Operation