Miele DA398-7 Petunjuk Pengoperasian dan Pemasangan - Halaman 25

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Miele DA398-7. Miele DA398-7 36 halaman.

a 3 protective installation sheets

for use when installing the chimney

b 1 exhaust connector

for an exhaust duct  6" (150 mm).

c 1 reducer

for an exhaust duct  5" (125 mm).

d 1 non-return flap

for installation in the outlet duct

collar of the motor unit (not for

recirculation mode). Depending on

the device version, the non-return

flap is already mounted.

e Wall bracket

for securing the hood on the wall.

f Recirculation kit for recirculation

mode

contains diverter, aluminum hose

and hose clamps (not contained in

scope of delivery, available as

optional accessory – see "Technical

Data").

8 screws, ³/₁₆" x 2 ³/₈" (5 x 60 mm)

8 plugs, ⁵/₁₆" x 2" (8 x 50 mm)

for attaching to the wall (not for use in

USA / CDN).



The screws and plugs are

designed for use in solid walls only.

Use different fasteners for other wall

construction types.

Make sure that the wall can support

the load.

2 x M 6 locknuts

for securing the canopy.

2 screws ¹/₈" x ⁵/₁₆" (3.9 x 7.5 mm)

for attaching the chimney.

1 lever

for disassembling the chimney.

Installation sheet

Installation