Miele PUR 98 D Petunjuk Pengoperasian dan Pemasangan - Halaman 39

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Miele PUR 98 D. Miele PUR 98 D 44 halaman. Ventilation system
Juga untuk Miele PUR 98 D: Petunjuk Pengoperasian dan Pemasangan (40 halaman), Petunjuk Pengoperasian dan Pemasangan (44 halaman), Petunjuk Pengoperasian dan Pemasangan (48 halaman), Manual (48 halaman)

Condensate

If the ducting is to run through cool

rooms or ceiling space, for example, the

significant variations in temperature

between the different areas can cause

condensate to form. Insulate the

ducting to reduce temperature

variations.

If the ducting is to be laid horizontally, it

must be laid with a downwards sloping

gradient of at least ³/₈" (1 cm) per meter.

This is to ensure that condensate

cannot drain back into the ventilation

hood.

In addition to insulating the ducting, it is

advisable to also install a condensate

trap for collecting and evaporating any

potential condensate.

Condensate traps for 5" (125 mm) or

6" (150 mm) diameter ducting are

available as optional accessories.

When installing a condensate trap,

ensure that it is positioned vertically

and as closely as possible to the

ventilation hood above the exhaust

vent. The arrow on the casing indicates

the direction of airflow.

Miele will not accept warranty claims

for any functional defects or damage

caused by inadequate ducting.

(optional accessory)

If you would like to reduce the

environmental impact of your ventilation

system by limiting the CFM output the

Reducing Collar can be installed. It

reduces the air flow to less than

400 CFM. Check local building codes

for max. CFM requirements.

 Push the Reducing Collar on the

exhaust port of the blower.

 Push the exhaust hose over it.

 Secure both with a hose clamp.

Installation