Miele 11 663 610 Panduan Petunjuk Pengoperasian - Halaman 20
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pengering Miele 11 663 610. Miele 11 663 610 20 halaman. Heat pump dryer
Halaman Cetak
Operating the tumble dryer
f Optical interface
This is used by the Service depart-
ment as a transmission point.
g Sensors for extra options
You can select extra options to aug-
ment drying programmes.
If a drying programme has been se-
lected, the sensor controls for the
possible extra options light up dimly.
h sensor
You can use the sensor to call up
an energy consumption forecast for
the selected drying programme.
See "Washing environmentally and
economically", section
"EcoFeedback" for more informa-
tion.
i sensors
The sensor starts the delay start
function. With the delay start func-
tion, you can choose when you want
the programme to start. The start of
the programme can be delayed from
15 minutes up to a maximum of 24
hours. This allows you to make use
of night-time economy electricity
rates, for example.
For further information see "4. Se-
lecting programme settings"
20
j Start/Add laundry sensor control
Touching the Start/Add laun-
dry sensor control starts a pro-
gramme. The current programme
can be interrupted to add laundry.
The programme can be started when
the sensor control is flashing on and
off. The sensor control lights up con-
stantly once the programme has
started.
k Programme selector
This is used for selecting pro-
grammes and for switching off. The
tumble dryer is switched on by se-
lecting a programme and switched
off by turning the programme se-
lector to the position.
Under Further programmes/ you
will find:
– The Wash2Dry function as well as
additional programmes
– The option to change Settings