Miele PDR 518 Petunjuk Pengoperasian dan Pemasangan - Halaman 32
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Pengering Miele PDR 518. Miele PDR 518 38 halaman. Commercial tumble dryers
Juga untuk Miele PDR 518: Petunjuk Pengoperasian dan Pemasangan (36 halaman)
Halaman Cetak
Installation
After the machine has been aligned, screw the nuts on the adjustable feet tightly to the
base plate using an open spanner.
Anchoring
The tumble dryer must be secured to the floor by fitting the tensioning strips supplied
over the machine feet.
The material provided is intended for use in bolting the machine to a concrete floor. For
other types of flooring, please purchase suitable fitting materials separately.
Electrical connection
The electrical connection must be established by a qualified electrician.
The electrical connection may only be made to an electrical system provided in
accordance with all appropriate local and national legislation, regulations and guidelines.
Please also observe the regulations set out by your insurance provider and energy
supplier, accident prevention regulations, as well as recognised codes of practice.
Reliable and safe operation of this tumble dryer is only ensured if it has been connected
to the mains electricity supply.
The required supply voltage, power rating and fuse rating can be found on the data plate
on the tumble dryer. Ensure that the supply voltage matches the voltage quoted on the
data plate before establishing the electrical connection to the tumble dryer.
Connection to a supply voltage other than the one quoted on the data plate can damage
the tumble dryer if the voltage is too high.
If more than one voltage is specified on the data plate, the tumble dryer can be
converted for connection to the relevant input voltage. This conversion must be performed
by the Miele Professional Service Department or by an authorised technician. During the
conversion, the wiring instructions given on the wiring diagram must be followed.
32