HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Desktop HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER. HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER 24 halaman. Intervideo ã¥â®â¶ã¥âºâ­ã¥â½â±ã©â„¢â¢ ã¥â¿â«ã©â‚¬å¸ã¥â€¦â¥ã©â€”â¨ã¦å’‡ã¥ââ€”
Juga untuk HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER: Panduan Pengguna (37 halaman), Manual Dukungan (27 halaman), Manual (10 halaman), Panduan Memulai Cepat (8 halaman), Panduan Memulai (2 halaman), Informasi Penting (1 halaman), Informasi Penting (1 halaman), Pemberitahuan Penting (1 halaman), Panduan Tambahan (1 halaman), Manual Dukungan (29 halaman), Manual (8 halaman)

Halaman Cetak
HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP CHARGER Manual
5 Hold the release tab down as you pull the cage
towards the back of the chassis, and then lift it
out (F). Removing the drive cage provides more
space to remove the cables.
E
6 Remove the cables attached to the back of the
drives in the drive cage.
7 Remove the screw from each side of the drive cage
to remove the memory card reader.
Or
Remove the screw from each side of the drive cage
to remove the diskette drive.
8 Pull the drive out through the front of the
drive cage.
Installing a Memory Card Reader
or a Diskette (Floppy) Drive
The PC may have a fixed or a removable drive cage
that holds the memory card reader and the diskette
drive. If the drive cage is fixed, follow the first set of
instructions, "To install a drive (with a fixed drive
F
cage) (select models)" on page 7. If the drive cage is
removable, follow the second set of instructions, "To
install a drive (with a removable drive cage) (select
models)" on page 8.
To install a drive
(with a fixed drive cage)
(select models)
1 See "Removing a Memory Card Reader or the
Diskette (Floppy) Drive" on page 6.
Or
Remove the faceplate of the drive bay.
2 Slide the drive inside of the drive cage through the
front of the PC. Make sure the connectors face
toward the back.
Upgrading and Servicing Guide
7