Miele PT 6185 Panduan Petunjuk Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pengering Miele PT 6185. Miele PT 6185 20 halaman.

Fault indicators / After sales service

Faults or interruptions are indicated by the

sequence lights/fault indicators flashing.

The indicator "Drying" will go out on dryers

with gas heating

Heating (flashing)

Fault in the heating system.

Call Miele's Technical Service Department

Extended heating (flashing)

The maximum running time of the drying

program was exceeded because the

residual moisture at the start of the program

was too high.

^ Restart the drying program.

If the fault message occurs again contact

the Miele Technical Service Department

Venting

Vent may be blocked.

^ Remove source of blockage.

Lint filter (lit)

The lint filter is clogged.

^ Clean the lint filter at the end of the

program.

Note:

The "Drying", "Cool down" and

"Anti-crease/End" indicators will flash if there

is a power failure or if a program has been

interrupted (e.g. when the door has been

opened). They do not indicate a fault. The

indicators will stop flashing once the "Start"

button is pressed.

In the event of a problem which you cannot

fix yourself, or to order spare parts please

contact the Miele Technical Service

Department

USA

1-800-999-1360

CDN

1-800-565-6435

When contacting the Technical Service

Department, please quote the model and

serial number of your appliance. They can

be found on the data plate located below the

drum opening.