Miele PT 7331 Panduan Petunjuk Pengoperasian - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pengering Miele PT 7331. Miele PT 7331 36 halaman. Innovationm tumble dryer
Juga untuk Miele PT 7331: Panduan Petunjuk Pengoperasian (36 halaman)
Halaman Cetak
Use
3. Select and start a program
The dryer uses an electronic sensor system
which monitors the residual moisture in the
laundry and a timer for extra safety.
Once the required level of dryness has been
reached the laundry is cooled and the
drying program will end.
1
Hot W. / Cot. extra dry
2
Hot Wash / Cottons dry
3
Hot Wash / Cottons moist
^ Select a program by turning the jog shuttle
(e.g. Program 2 Hot Wash / Cottons dry).
^ See the "Program Guide" for more
information on the standard programs.
Select [ "Blockplus" if needed
(Not available for standard programs)
^ Confirm the selected program by pressing
the center button of the jog shuttle.
22
Hot Wash / Cottons dry
15 %
Drying
Cool down
[
^ Press the [ "Blockplus" button to select
a program block, e.g. pre-drying if
required.
22
Hot Wash / Cottons dry
24 %
Pre-drying
0 %
Drying
[
The field [ is highlighted.
The function can be deselected by pressing
the button again.
^ Press the h "Start" button to begin the
program.
12
0%
0%
20%
FC
A
22.0 / 22.0 lb
176 °F
e
A
m
22.0 / 22.0 lb
e
A
m
4. Program end
2
Hot Wash / Cottons dry
Program end
Anti-crease
m
The program end is shown in the display
and the buzzer sounds.
If the laundry is not removed from the
machine at the end of the program an
anti-crease cycle will automatically start. The
drum turns at intervals to minimize creasing
in the laundry.
,
The laundry must not be removed
from the dryer before the drying program
has finished. The cooling down phase
must be completed.
If hot laundry items are stacked or packed
they could spontaneously combust.
^ Open the drum door.
^ Remove the laundry.
2
Hot wash / Cottons dry
Program end
CHECK LINT FILTER
The display shows "Check lint filter" when the
lint filter needs to be cleaned.
^ Clean the lint filter immediately after the
program ends.
^ Close the drum door.
^ Press the 0 "Off" button to turn off the
machine.
^ Turn off power at the power mains (on
site).
^ Close the on site gas or steam valve.
Finish at 12:35
FC
K
f
A