Miele PT 8303 SL EL Rencana Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Rencana Instalasi untuk Pengering Miele PT 8303 SL EL. Miele PT 8303 SL EL 14 halaman.
Juga untuk Miele PT 8303 SL EL: Panduan Petunjuk Pengoperasian (44 halaman), Panduan Petunjuk Pengoperasian (28 halaman)

Halaman Cetak
Miele PT 8303 SL EL Rencana Instalasi
Technical datasheet
Tumble dryer:
Heating:
Legend:
Machine connections:
Electrical
1. Standard voltage (as supplied)
connection
2. Standard voltage ( convertible)
3. Standard voltage (convertible)
Electrical connection must comply with national regulations.
Connection using multi-pole lockable wall socket in
compliance with IEC/EN 60309 and IEC/EN 60947 is
recommended in order to simplify electrical tests. If machines
are hard-wired, a multi-pole mains switch must be provided
on site. Switches with a contact gap of more than 3 mm can
be used. These include switches, fuses and contactors
(IEC/EN 60947). A wall socket or mains isolator must be
easily accessible after installation.
Reinstallation of the supply point, changes to the equipment
or checks on the protective conductor, including determination
of correct fuse rating, should only be performed by a properly
trained electrician.
If necessary, equipotential bonding with good galvanic contact
must be provided in accordance with all appropriate national
and local regulations.
Vented
Nominal air throughput in vented mode
Max. permissible pressure loss
Connection on machine side (int. diameter)
Connection pipe provided on site (ext. diameter)
Max. Temperature waste air/gas
As relative humidity inside the vent ducting can be as high as
100%, suitable measures must be taken to prevent a
backflow of condensate into the machine.
Installation plan: PT 8303
Date: Jan-2015
Abbreviations in bold type:
Connection required
Abbreviations in circle with dashes:
Connection optional or required depending on model version
Frequency
Rated load
Fuse rating
Supplied without power cord
Frequency
Rated load
Fuse rating
Supplied without power cord
Frequency
Rated load
Fuse rating
Supplied without power cord
PT 8303 Slimline
Electric (EL)
en - CA
3 AC 220 - 240 V
60 Hz
15.4 kW
3 x 40 A
3 AC 208 V
60 Hz
11.7 kW
3 x 35 A
2 AC 208 V
60 Hz
8.1 kW
2 x 40 A
483 cfm
821 m³/h
0.0435 psi
300 Pa
5 15/16"
150 mm
5 15/16"
150 mm
176°F
80°C
Page: 11