HP 226824-001 - ProLiant - ML750 Panduan Pelaksanaan - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pelaksanaan untuk Desktop HP 226824-001 - ProLiant - ML750. HP 226824-001 - ProLiant - ML750 26 halaman. Visualization and acceleration in hp proliant servers
Juga untuk HP 226824-001 - ProLiant - ML750: Pertanyaan yang Sering Diajukan (4 halaman), Panduan Pelaksanaan (35 halaman), Buku Putih Teknis (12 halaman), Pembaruan Firmware (9 halaman), Ikhtisar (20 halaman), Panduan Pengenalan (22 halaman), Panduan Pemecahan Masalah (18 halaman), Panduan Pelaksanaan (11 halaman), Panduan Instalasi (2 halaman), Panduan Konfigurasi (2 halaman), Panduan Pengenalan (19 halaman), Manual Pembaruan (9 halaman), Manual Pembaruan (16 halaman), Panduan Pengenalan (12 halaman), Panduan Pengenalan (10 halaman), Ringkasan Teknologi (9 halaman)

Read-Only Domain Controllers

Windows Server 2008 introduces a new type of domain controller (DC), the read-only domain

controller (RODC). This DC hosts read-only partitions of the Active Directory Domain Services (ADDS)

database. An RODC provides a secure solution for DC deployments to remote sites that require fast

and reliable authentication but do not necessarily have adequate physical security for the deployed

servers.

Additional information is available on the Microsoft website:

http://technet2.microsoft.com/windowsserver2008/en/servermanager/activedirectorydomainservice

s.mspx.

Microsoft has updated the TCP/IP stack in Windows Server 2008. For more information on the next

generation TCP/IP stack in Windows Server 2008, visit the Microsoft website:

www.microsoft.com/technet/community/columns/cableguy/cg0905.mspx.

NDIS 6.0 is the next major version of the Network Driver Interface Specification. HP has updated the

Windows Server 2008-capable network adapter drivers to meet the NDIS 6.0 requirements. A list of

supported network adapters may be found in Table 5. For more information on NDIS 6.0, visit the

Microsoft website: http://msdn2.microsoft.com/en-us/library/ms795192.aspx.

Windows Server 2008 provides support for the next generation TCP/IP protocol stack known as

Internet Protocol version 6 (IPv6). Administrators should be aware that IPv6 support is enabled by

default in a Windows Server 2008 installation. It cannot be uninstalled but may be disabled. For

more information on IPv6, visit the Microsoft website:

http://www.microsoft.com/technet/community/columns/cableguy/cg1005.mspx.

Windows Hardware Error Architecture is a new feature added to Windows Server 2008 that

provides a common infrastructure for hardware errors on Windows platforms.

The initial implementation of WHEA focuses on platform hardware devices, including processor,

memory, cache, and system interconnects such as PCI, PCI-X, and PCI Express. Peripheral device

errors remain under the control of their respective device drivers.

WHEA provides several benefits:

• A generic error source discovery mechanism

• A common hardware error record format and error handling flow

• A persistence mechanism for preserving error records

• A hardware error event tracking model based on Event Tracing for Windows (ETW)

Not all HP servers that support Windows Server 2008 will be WHEA compatible.

lists the

Table 2

WHEA-capable ProLiant servers. HP has updated the following deliverables in support of WHEA:

• System ROMs for specific ProLiant server platforms planned for WHEA support (see

)

Table 2

• iLO firmware (version 1.42 or later)

• iLO 2 Management Controller Driver for Windows Server 2008 [hpqilo2.sys, Version 1.5 (or later)]