HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Desktop HP 2530p - EliteBook - Core 2 Duo 2.13 GHz. HP 2530p - EliteBook - Core 2 Duo 2.13 GHz 20 halaman. Notebook pc
Juga untuk HP 2530p - EliteBook - Core 2 Duo 2.13 GHz: Spesifikasi (36 halaman), Panduan Produk (16 halaman), Panduan Pengguna (15 halaman), Manual Jaringan (16 halaman), Spesifikasi (2 halaman), Panduan Pengguna (27 halaman), Setup Manual (19 halaman), Ikhtisar (16 halaman), Manuallines (12 halaman), Panduan Instalasi Perangkat Lunak (8 halaman), Manuallines (6 halaman), Panduan Penyiapan dan Konfigurasi (18 halaman), Instalasi Driver (20 halaman), Manuallines (7 halaman), Panduan Pengguna (31 halaman), Panduan Pengguna (46 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (42 halaman), Spesifikasi (45 halaman), Panduan Pengguna (30 halaman), Panduan Pengguna (24 halaman), Quickspecs (46 halaman)

Halaman Cetak
HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Manual
cd tboot.hg/txt-test
13.
make install (this will create txt-test executable file, run './txt-stat' to read the serial messages from
14.
the memory buffer. Refer Appendix A for the sample tboot serial output).
edit the menu.lst to additional grub entry:
15.
title Fedora Core (Xen 3.3.0 with TXT)
root (hd0,0)
kernel /tboot.gz
module /xen.gz iommu=required com1=115200,8n1 console=com1
module /vmlinuz-2.6.18.8-xen root=LABEL=/ ro console=tty0 console=ttyS0, 115200, 8n1
pci=nommconf (All in a single line. Please note that the 'console' parameter will have no effect
here since the unit lacks any serial port)
module /initrd-2.6.18.8-xen.img
module /sinit.bin
Make sure to check the root location and 'root=LABEL=/' match with the first grub entry and points
16.
to the root partition.
Reboot the system. Enable TPM, VTD and TXT in the BIOS settings.
17.
The next time you boot into the system, you can select the option at the boot menu to boot into
18.
'Xen 3.3.0 with TXT'. Copy the latest sinit.bin file into /boot directory.
Note: If the unit hangs after you boot into Tboot at the boot menu, check if you have any USB devices
plugged in to your unit. Also disable USB Legacy Support in your BIOS settings (under F10: System
Configuration
Device Configurations

TPM TOOLS 1.3.1 Installation

Open the terminal
1.
cd ~/
2.
If required set the proxy options as, export http_proxy=<proxy address>:<port number>
3.
Install wget if not already installed (yum install wget)
4.
wget
http://internap.dl.sourceforge.net/sourceforge/trousers/tpm-tools-1.3.1.tar.gz
5.
Make sure you have 'automake', 'autoconf', 'libtool', 'gettext' and 'trousers' installed.
6.
tar –xzvf tpm-tools-1.3.1.tar.gz
7.
cd tpm-tools-1.3.1
8.
./configure
9.
make
10.
make install
11.

LCP: Define Platform Owner Policy

Take TPM Ownership:
Open the terminal
1.
sudo –s
2.
ldconfig (in case of FC8 you may have to try '/sbin/ldconfig')
3.
USB legacy Support) and try to boot into Tboot again.
5