HP 3000 969KS/200 Manual - Halaman 18

Jelajahi secara online atau unduh pdf Manual untuk Desktop HP 3000 969KS/200. HP 3000 969KS/200 20 halaman. 9x9 to k class conversion

Warranty (con't)

For warranty service or repair, this product must be returned to a service facility designed by HP.

Buyer shall prepay shipping charges to HP and HP shall pay shipping charges to return the product to

Buyer. However, Buyer shall pay all shipping charges, duties, and taxes for products returned to HP

from another country.

HP warrants that its software and firmware designed by HP for use with an instrument will execute

its programming instructions with properly installed on that instrument. HP does not warrant that the

operation of the instrument, or software, or firmware will be uninterrupted or error free.

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance

by Buyer, Buyer-supplies software or interfacing, unauthorized modification or misuse, operation

outside the environmental specifications for the product, or improper site preparation or maintenance.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. HP SPECIFICALLY DISCLAIMS

THAT IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

Exclusive Remedies

THE REMEDIES PROVIDED HEREIN ARE BUYER'S SOLE AND EXCLUSIVE REMEDIES.

HP SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR ANY

OTHER LEGAL THEORY.

Assistance

Product maintenance agreements and other customer assistance agreements are available for Hewlett-

Packard products.

For any assistance, contact your nearest Hewlett-Packard Sales and Service Office.

Safety Information (con't)

Warning

Any interruption of the protective grounding conductor (inside or outside the instrument) or

disconnecting the protective earth terminal will cause a potential shock hazard that could result in

personal injury. (Grounding one conductor of a two conductor outlet is not sufficient protection.)

Whenever it is likely that the protection has been impaired, the instrument must be made inoperative

and be secured against any unintended operation.

If this instrument is to be energized via an autotransformer (for voltage reduction) make sure the

common terminal is connected to the earthed pole terminal (neutral) of the power source.

Warranty and Safety