Miele T 8903 C Panduan Petunjuk Pengoperasian - Halaman 24
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pengering Miele T 8903 C. Miele T 8903 C 48 halaman. Condenser tumble dryer
Halaman Cetak
Problem solving guide
Problem
There is a build-up of
fluff.
The laundry is not
sufficiently dry.
Water leaks from the
machine after the
condenser unit has
been cleaned.
The interior drum
lighting is not
switched on.
* You can alter the drying levels for some programmes: see "Settings menu".
24
Possible cause
Fluff is principally the result
of friction when garments
are being worn and to
some extent when they are
being washed. Machine
drying hardly causes any
fluff to form and has no
appreciable effect on the
lifetime of the fabric.
The load consisted of
different fabrics.
– The inner cover of the
condenser unit has not
been locked properly
and/or the condenser
unit has not been
positioned correctly.
– There is a build-up of
fluff.
The lighting switches off
automatically (to save
energy).
The lamp needs changing. You can change the lamp
Remedy
Fluff is collected by the fluff
filters and can be easily
removed (see "Cleaning
and Care").
– Finish drying using the
Warm air programme.
– Select a suitable
programme* next time
you tumble dry.
– Ensure that the
condenser unit is
positioned correctly and
lock the inner cover.
– Check the rubber seals.
– Use a cloth to remove
any visible fluff from the
inside of the condenser
unit housing.
Switch the dryer off and
then on again.
as described in "Changing
the lamp" at the end of this
section.