360 YIELD CENTER 360 BANDIT Petunjuk Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Peralatan Pertanian 360 YIELD CENTER 360 BANDIT. 360 YIELD CENTER 360 BANDIT 4 halaman.
Juga untuk 360 YIELD CENTER 360 BANDIT: Petunjuk Instalasi (2 halaman)

Halaman Cetak
INSTALLATION INSTRUCTIONS
HARVEST INTERNATIONAL
STEP 3
INSTALL ROCK GUARD
6
Insert one of the longer 1/2" bolts 6 through the rock
guard 7 and then through the front hole on the closing
system plate. Secure to the BANDIT unit.
Insert the second 1/2" bolt through the rear hole of the
closing system plate 8 and secure to the BANDIT unit.
Tighten both using 3/4" wrench and socket.
STEP 4
PREPARE HOSE GUIDES
9
8
CUT
7
7
11
Using side-cutters, cut the two hose guides apart 9.
Route the hose through the top two holes in the hose guide
.
10
Hose guides are labeled "L" left and "R" right
NOTE: When installing hoseguides on the row unit, left and
right are determined from the operators seat.
9
6
10
11
.
PAGE 3
STEP 5
INSTALL DISK ASSEMBLY
13
15
14
12
16
12
Insert 5/8" X 3" bolt
through the disk
12
14
(large side first) and hose guide assembly
facing in).
Slide bolt of the disk assembly into the lower hole on the
bandit
, aligning the ear tab
with corresponding upper
12
16
hole and secure with lock nut.
Tighten with 15/16" socket and wrench.
Using a mallet, install provided dust caps over disk bolt
heads.
Route application hose through hole in top of 360 BANDIT
frame
17
.
Repeat for other side.
16
17
. Insert bushing
13
15
(ear tab
16