Miele TOUCHTRONIC T 9802 Petunjuk Pengoperasian dan Pemasangan - Halaman 41

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Pengering Miele TOUCHTRONIC T 9802. Miele TOUCHTRONIC T 9802 44 halaman. Vented dryer
Juga untuk Miele TOUCHTRONIC T 9802: Petunjuk Pengoperasian dan Pemasangan (44 halaman)

Halaman Cetak

Exhaust connection with a

flexible exhaust hose or rigid

pipe

Using the connector supplied, an

exhaust hose (4" [100 mm]

diameter) can be installed.

Necessary materials:

– a wall or window duct

(available from Miele)

– an exhaust hose made of approved

non-flammable material

^ Install the required connector*, 1,

with the exhaust hose or pipe, 2, to

the dryer.

* The white connector with clips is

used for connection to a hose; the

gray connector without clips is used

for connection to a pipe.

The exhaust duct must not be

connected or secured with screws

or other fastening devices which

extend into the interior of the duct.

Window connection (example)

1 Window duct

2 Connector for the rigid or flexible

exhaust hose

Wall connection (example)

1 Wall pipe (Installation sheet supplied

with the Miele wall pipe)

2 Connector

3 Rigid pipe

Installation