HP 800 Series Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Desktop HP 800 Series. HP 800 Series 34 halaman. Version a.01.08
Juga untuk HP 800 Series: Catatan Rilis (19 halaman)

Halaman Cetak

C A U T I O N

Using OmniBook Disk Drives

Installing a Floppy Disk Drive

To remove a floppy disk drive

Always wait until all disk activity stops before ejecting a disk or unplugging a

cable. The light on the front of the floppy disk drive is on when the OmniBook

is reading from or writing to the floppy disk drive.

1. Squeeze the tabs on the large cable plug and hold firmly while pulling the plug

from the back of the floppy drive.

2. Squeeze the tabs on the small cable plug and hold firmly while pulling the plug

from the back of the OmniBook.

To insert or remove a floppy disk

Do not remove a floppy disk while the OmniBook is actively reading or writing

data. Wait until the floppy drive is done —otherwise, you could lose data or the

OmniBook could stop responding.

1. To insert a floppy disk, hold the disk with its face up and slide it into the floppy

drive slot until it clicks into place.

2. To remove the floppy disk, press the eject tab. (If you're using the F1059B

model, slide the eject switch on the top of the floppy disk drive to the rear.)

1-10

Press the eject tab to

remove the floppy disk.