Miele F 1911 SF Panduan Petunjuk Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kulkas Miele F 1911 SF. Miele F 1911 SF 24 halaman. Sf freezers (36 inch)
Juga untuk Miele F 1911 SF: Dimensi (2 halaman), Spesifikasi (3 halaman), Petunjuk Pengoperasian dan Pemasangan (26 halaman)
Halaman Cetak
en
. . . with partition
The minimum thickness of the partition
5
is
/
" (16 mm).
8
If there is a partition with a thickness
5
from
/
" (16 mm) to 6
8
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
In this case, you will only need the
heating mat from the "Merging Kit" to
avoid condensation and prevent
damages.
Installing the heating mat will
increase energy consumption.
4
5
/
" (160 mm)
16
When finding the dimensions for the
partition in model 4, note the thickness
of the custom door panels and the door
handles. This will prevent damage to
the doors if they are opened at the
same time.
Required accessories and
tools
To connect a side-by-side
combination, you will need a
Top-frame, which can be obtained
from Miele.
Tools
– T 20 Torx screwdriver
– T 20 Torx bit + magnetic holder
– Adjustable wrench
Other
– Various bit sizes, suitable for material
– Piece of thin material (for example,
linoleum) to protect the floor from
damage
– Adhesive tape