Miele K 12012 S-2 Panduan Pengoperasian dan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Instalasi untuk Kulkas Miele K 12012 S-2. Miele K 12012 S-2 48 halaman.

This appliance contains the coolant Isobutane (R600a), a natural

gas which is environmentally friendly. Although it is flammable, it

does not damage the ozone layer and does not increase the

greenhouse effect. The use of this coolant has, however, led to a

slight increase in the noise level of the appliance. In addition to the

noise of the compressor, you might be able to hear the coolant

flowing around the system. This is unavoidable, and does not have

any adverse effect on the performance of the appliance.

Care must be taken during the transportation and installation of the

appliance that no parts of the cooling system are damaged. Leaking

coolant can damage the eyes.

In the event of any damage:

- avoid open flames and anything which creates a spark,

- disconnect from the mains,

- air the room in which the appliance is located for several minutes

and

- contact the Service Department for advice.

The more coolant there is in an appliance, the larger the room it

should be installed in. In the event of a leakage, if the appliance is in

a small room, there is the danger of combustible gases building up.

For every 8 g of coolant at least 1 m

amount of coolant in the appliance is stated on the data plate inside

the appliance.

Safe operation of the appliance is only assured if it has been

installed and connected in accordance with these operating and

installation instructions.

Before connecting the appliance, make sure that the connection

data on the data plate (voltage and frequency) matches the mains

electricity supply.

This data must correspond in order to avoid the risk of damage to

the appliance. Consult a qualified electrician if in any doubt.

Warning and Safety instructions

of room space is required. The