Miele K 12020 S-1 Panduan Pengoperasian dan Instalasi - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Instalasi untuk Kulkas Miele K 12020 S-1. Miele K 12020 S-1 48 halaman.

The shelves in the refrigerator section

can be adjusted according to the

height of the food.

^ Raise the shelf, and pull it forwards

slightly until the notch at the side is in

line with the shelf support. It can then

be raised or lowered to the required

level.

^ The raised edge at the back must

face upwards to prevent food from

touching the back of the appliance

and freezing to it.

Stoppers prevent the shelves from

being dislodged by mistake.

(depending on model)

In order to accommodate tall items in

the appliance, one of the shelves is

divided. The front section can be

pushed under the rear section.

^ Push the rear half of the glass shelf

up slightly from below.

^ At the same time, pull the front half of

the glass shelf forwards slightly and

then push it carefully under the rear

half.

Adjusting the interior fittings

Adjusting the door shelf/bottle

shelf

^ Push the door/bottle shelf upwards,

then remove it by pulling it forwards.

^ Replace the door/bottle shelf at the

required position. Ensure that it is

securely pushed back into position.