Miele K 12820 SD edt Petunjuk Pengoperasian dan Pemasangan - Halaman 42

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kulkas Miele K 12820 SD edt. Miele K 12820 SD edt 48 halaman. Refrigerator with dynamiccooling
Juga untuk Miele K 12820 SD edt: Panduan Pengoperasian dan Instalasi (48 halaman), Panduan Pengoperasian dan Instalasi (40 halaman), Petunjuk Pengoperasian dan Pemasangan (44 halaman), Petunjuk Pengoperasian dan Pemasangan (44 halaman)

Changing the door hinging

Refitting the handle

Please make sure you follow the

instructions below carefully when

you refit the handle. The door seal

will be damaged if the handle is

fitted incorrectly.

^ Loosely attach the handle to the

opposite side of the door with the two

front screws b.

Mounting plate c must be positioned

on the side of the door so that when the

door is closed, it is flush with the side

of the appliance.

If this is not the case,

^ tighten both grub screws a with an

Allen key until mounting plate c lines

up correctly.

^ Then tighten all 4 fixing screws b.

^ Slide the side section of the handle

d into the guides on the mounting

plate until it clicks into place.

It is important to check that the side

section of the handle d does not

come into contact with the door seal

when opening the door as this would

damage the door seal permanently.

If, after you have refitted the handle,

you find that the side section does

touch the door seal when the door is

opened:

^ Realign mounting plate c with grub

screws a until the mounting plate

and the side section of the handle d

are at the correct angle and the side

section does not touch the door seal

when the door is opened.