Miele K 852i Panduan Pengoperasian dan Instalasi - Halaman 37
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Instalasi untuk Kulkas Miele K 852i. Miele K 852i 44 halaman.
Juga untuk Miele K 852i: Panduan Pengoperasian dan Instalasi (40 halaman)
Halaman Cetak
^ Screw a long 4 x 19 mm chip board
screw b loosely into the middle of
the long slot on the plastic bracket
and then turn the plastic bracket c
downwards.
^ Close the door.
^ A gap of 8mm a must be set
between the appliance door and the
fixing bracket.
^ Push fitting aids d up to the height of
the furniture door: the lower edge "X"
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted, see - on
the diagram.
^ Undo nuts b and take fixing bracket
c off together with the fitting aids.
^ Using a pencil mark a line down the
centre of the inside of the furniture
door.
^ Hang the fixing bracket with the
fitting aids a onto the
the furniture door. Align the fixing
bracket centrally.
^ Attach the fixing bracket securely
using at least 6 short 4 x 14 mm chip
board screws b. (On cassette doors
only use 4 screws on the edges).
^ Pull the fitting aids upwards to
remove them c.
^ Turn them round and insert them right
into the middle slots on fixing bracket
d.
of
37