Miele K 8682 SD Panduan Pengoperasian dan Instalasi - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Instalasi untuk Kulkas Miele K 8682 SD. Miele K 8682 SD 36 halaman. Refrigerator with dynamic cooling

Halaman Cetak

^ Open the door, tilt it downwards and

take it off. Take care not to lose

washer a.

^ Using a screwdriver remove covers

^ Unscrew upper hinge pin c using

the spanner supplied, and refit on the

opposite side.

^ Put covers b back on again from

behind and then push them firmly

into place from the front.

^ Remove spacer d with a screwdriver

and refit it on the opposite side.

^ Remove plug e from the door

bearing bush in the door and refit on

the opposite side.

^ Hang the door in hinge pin c

(remember to use washer a), then

close the door.

In the following illustration the door

is not shown in the closed position to

make it easier to see what happens

next.

^ Turn door support b around, pull

hinge pin a out, and refit on the

opposite side.

^ Fit both parts into hinge plate f. To

do this push hinge pin a through

hinge plate f into door support b.

Swing the door support in, push

upwards and re-assemble with screw

^ Align the door with the appliance

housing using the long slot in hinge

plate f. Then tighten screw c.

^ Refit plinth fascia d, pushing it firmly

into position.