Miele KS 28463 D Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kulkas Miele KS 28463 D. Miele KS 28463 D 21 halaman.

Installation

Fitting the supplied wall spacers

The wall spacers supplied must be

used in order to achieve the stated

energy consumption values and to

prevent the build-up of condensation

at high ambient temperatures.

Appliance depth is increased by

approx. 15 mm with the wall spacers

fitted. If the wall spacers are not used,

the functionality of the appliance is not

affected. However, energy

consumption is slightly increased with

less distance between the appliance

and the wall.

 Fit the wall spacers onto the back of

the refrigeration appliance on the

bottom left and right.

11210790-04

Limiting the opening angle of the

door

The door hinges are set at the factory to

enable the door to be opened up to

115°. If the appliance door hits an

adjacent wall when opened, for

example, the opening angle can be

limited to approx. 90°:

The door opening angle limiter should

be fitted before the refrigeration

appliance is installed.

Fitting the door opening angle limiter

 Disconnect the appliance from the

mains. Switch off at the wall and

withdraw the plug from the socket, or

switch off the mains circuit breaker.

– Removing the soft-close

mechanism

 Open the appliance door.

 Slide off the right outer cover .