Miele GAS KM 81-2 Panduan Petunjuk Pengoperasian - Halaman 29
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kompor Miele GAS KM 81-2. Miele GAS KM 81-2 32 halaman. Gas
Juga untuk Miele GAS KM 81-2: Panduan Petunjuk Pengoperasian (44 halaman)
Halaman Cetak
Conversion to alternative types of gas
Important note:
When reassembling, it is important
to ensure that the profile
control panel should grip the appro-
priate moulding
tective casing.
Screw the three screws into the bur-
ner base using a suitable cross-
head screwdriver.
Put the large burner cap base, the
burner collar ring, the large burner
cap and the wok/pan support in
place.
Check whether the lug of the large
burner cap is correctly positioned in
the notch in the large burner cap
base and whether the lug of the
large burner cap base is correctly
positioned in the notch in the burner
base.
Conversion to alternative types of gas
b
of the
c
on the lower pro-
After conversion
After converting the gas hob unit to
an alternative type of gas, place the
label supplied with the jet kit on to
the data plate over the type of gas
stated.
Check that there are no leakages.
Check that the burner is correctly
assembled.
Turn on the gas supply.
Turn on the electrical supply.
Light the burner:
When set at "low", or when the control
knob is quickly turned from "high" to
"low", the flame should not go out.
When set at "high" the inner core of
the gas flame should be clearly
visible.
29