Miele KM 360 G Panduan Petunjuk Instalasi - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kompor Miele KM 360 G. Miele KM 360 G 28 halaman. Gas-hobs
Juga untuk Miele KM 360 G: Panduan Petunjuk Instalasi (16 halaman), Panduan Petunjuk Pengoperasian (20 halaman), Dimensi Produk (1 halaman), Spesifikasi (7 halaman), Panduan Petunjuk Pengoperasian (20 halaman), Panduan Petunjuk Pengoperasian (20 halaman), Panduan Petunjuk Pengoperasian (20 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Panduan Petunjuk Instalasi (24 halaman), Panduan Petunjuk Instalasi (16 halaman), Panduan Petunjuk Instalasi (28 halaman)

Halaman Cetak
Miele KM 360 G Panduan Petunjuk Instalasi
Conversion to another type of gas

After conversion

^ Assemble all burners in the reverse
order and check for leaks by
operating them without the upper
part of the hob in place (use a match
to ignite the flame).
^ Take off all burner parts again.
^ Put the upper part of the hob in
place.
KM 360 G / KM 362 G
When replacing the stainless steel
upper section:
Position the upper section as shown in
the illustration, pushing it forwards first
of all and then backwards until the
angle bracket a clicks into place
underneath the lip b of the lower
section. Then lower the upper section.
a
b
24
^ Screw on the burner head and
assemble all loose burner parts in the
correct order.
^ Push the control knobs back into
place.
^ Check the behaviour of the flames by
lighting all burners.
The flame must not go out in the lowest
setting, nor when the control is turned
quickly from a high to a low setting.
In the highest setting the flame must
have a distinctive and visible core.
Place the sticker enclosed with the
conversion kit next to the data plate
underneath the appliance.