Miele KM 406 Panduan Petunjuk Instalasi - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kompor Miele KM 406. Miele KM 406 40 halaman. Gas cooktop
Juga untuk Miele KM 406: Panduan Petunjuk Pengoperasian (20 halaman), Panduan Dimensi (1 halaman), Panduan Petunjuk Instalasi (20 halaman), Panduan Petunjuk Instalasi (40 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Panduan Petunjuk Pengoperasian (24 halaman), Panduan Petunjuk Pengoperasian (20 halaman), Panduan Petunjuk Instalasi (28 halaman), Panduan Petunjuk Instalasi (20 halaman)

Halaman Cetak
Miele KM 406 Panduan Petunjuk Instalasi

Worktop cut-out for KM 404 / KM 405 / KM 406

Dimensions 7 mm and 11 mm are the
space taken up by the frame of the
appliance on the worktop.
^ Make a cut-out for the hob in the
worktop, paying attention to the
appliance height. See section
"Appliance dimensions".
Dimension "B" applies to a combination
of appliances and is shown on the
chart.
There must be a minimum safety
distance of 50 mm between the hob
and the back wall and 100 mm
distance from a side wall to the right or
left of the hob (250 mm with KM 406).
See also chapter "Warning and Safety
instructions".
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
Installing one or more appliances
Cut out the worktop according to the
dimensions listed in the following chart.
Depth in
Number
of
± 1 mm
appliances
1
2
3
4
5
6
7
Important:
The maximum tolerance for the worktop
cut-out must not exceed ± 1 mm.
When building in several combiset
appliances a spacer bar must be
fitted between each unit.
See chapter "Fitting the spacer bars
and support brackets".
Worktop cut-out
Width
mm
(= Dim. B)
in mm
± 1 mm
500
266 mm
500
554 mm
500
842 mm
500
1130 mm
500
1418 mm
500
1706 mm
500
1994 mm
13